Pick Mattock ~ Cutter Mattock ~ Pick Axe
The only US store where you can purchase a pick axe or mattock featuring a 3lb head
with an easy-to-use 45" long handle. No more too-heavy too-short tools for you!
(36" handles also available)
45" Long handle Mattocks and Pick axe
|
Use your Pick Mattock to...
 | | break hardened or rocky soils
|
 | | lever out stones and pavers
|
Use your Cutter Mattock for...
 | | chopping out roots while loosening the soil
|
 | | trenching through root choked soils
|
Use your Pick Axe to...
 | | break and remove stones and concrete
|
 | | carve through pavement and rock |
| | |
Longer handles = faster digging with less effort
The only US store that offers 45" long handles combined with 3 lb forged heads from Tramontina Amazingly better than the typical too-heavy too-short mattock or pickaxe.
36" handles are also available.
|
A cutter mattock combines a
3" digging blade with a 2" wide
axe to chop roots and break
up tough soils.
This 3 lb forged steel tool is
made of high quality steel by
a world-class manufacturer in
Brazil.
The long 45" hardwood
handle is made in the USA.
A pick mattock combines a 3"
digging blade with a 6" pick
end for breaking up hardened
or rocky soils.
This 3 lb forged steel tool is
made of high quality steel by
a world-class manufacturer in
Brazil.
The long 45" hardwood
handle is made in the USA.
A pick axe combines a 6" pick
end with a 1.5" chisel blade to
break and remove rock,
concrete, and pavement.
This 3 lb forged steel tool is
made of high quality steel by
a world-class manufacturer in
Brazil.
The long 45" hardwood
handle is made in the USA.
A pick mattock combines a 3"
digging blade with a 6" pick
end for breaking up hardened
or rocky soils.
This 3 lb forged steel tool is
made of high quality tempered
in Brazil by a world-class
manufacturer.
The 36" hardwood handle is
made in the USA.
A cutter mattock combines a
3" digging blade with a 2" wide
axe to chop roots and break
up tough soils.
This 3 lb forged steel tool is
made of high quality steel in
Brazil by a world-class
manufacturer.
The 36" hardwood handle is
made in the USA.
A pick axe combines a 6" pick
end with a 1.5" chisel blade to
break and remove rock,
concrete, and pavement.
This 3 lb forged steel tool is
made of high quality steel in
Brazil by a world-class
manufacturer.
The 36" hardwood handle is
made in the USA.
Which handle length is right for you?
If you are breaking up concrete or carving through large stones then use the standard 36" handle with an
overhead swing for maximum force. For all other tasks you can easily use the long 45" handle.
There are two ways to use a mattock or pick axe : the hard way and the easy way...
The hard way is to swing a short handled mattock up and over your head, like an axe, then rapidly bend your
back to plunge the tool into the ground. This works well where lots of force is needed - like for breaking
concrete. But for most digging tasks it is overkill and may damage your back.
The easy way is to raise a long handled mattock up to chest height then swing it back into the ground - using
the weight of the tool head and the leverage of the long handle to produce a forceful strike - while keeping your
back in a more gentle posture. That's why we offer long 45" handles for our picks and mattocks.
(If your height is less than 4'6" you can use the 36" handle with the recommended chest height swing.)
36" handle Mattock and Pick Axe
|
Check out the new TOOL SELECTOR at the bottom of the page !
|